24
Getting Started
7. Under ID, press the QR code button ( ) and line up the QR code printed on the back
of the camera using the camera on the Android™ phone or tablet. The CamID will
a
utomatically be entered.
• OR: M
anually enter the CamID printed on the camera.
8. Under Pa
ssword, enter the camera password. If this is the first time connecting to
the camera, enter lorex. Press OK.
Press to scan the QR code
printed on the back of the
camera, OR manually enter the
CamID printed on the camera
Line up the QR code to the
middle using the camera on the
phone or tablet
Enter the camera password. The
default password is lorex.
To Next Page
Loading...
