57
L-View 116 for PC
English
2. Under Window #, select the screen you would like the schedule to run on. The
arrangement of screens in L-View is shown above.
3. Double-click a camera from the Camera Lis
t to select it for this schedule. The
camera connection information automatically populates. Under Password, enter the
camera password if it is not saved in L-View.
4. Select Enabl
e to enable the schedule or Disable to disable it.
5. Select P
eriodic recording.
6. Under Time period, sel
ect Forever to have the schedule repeat forever, or select
During to have the schedule apply only from a specified start date to end date.
• If you select During, configure the s
tart date and end date.
Select Enable to enable schedule
Select screen schedule will run on
Double-click
the camera
Select
Periodic
recording
Select Forever
or during
Select what to
do if screen is
occupied
when
schedule
starts
Click Save
Configure
recording
times
To Next Page
Loading...
