83
L-View for Mac
English
1. Window Controls: Click to exit or minimize L-View.
2. Camer
a List: Shows cameras that have been saved in L-View. Double-click cameras
to connect to them.
NOTE: To con
nect to multiple cameras, click to select a display area. The selected area
is highlighted. Then, double-click the camera to open it in the selected area.
3. Aut
o Search List: Auto Search shows cameras located on your local network (LAN).
• Double-click the camera ID to view the camera.
• Dr
ag the camera to the Camera List to save the camera.
• Right-click the camera ID and select Web configure to configure the camera settings
using a browser. See “Configuring Camera Settings using a Web Browser” on
page 171.
4. Playback: Click t
o open Playback mode. For details, see “Playing Back Video
from your Mac’s Hard Drive” on page 91.
5. All Camer
a Action: Click to perform an action on all cameras.
6. R
ecording Controls:
• Re
cord: Click to start/stop manual recording. For details, see “Recording Video
to your Mac’s Hard Drive” on page 90.
• Snapshot: Click to take a snapshot from the camera. To view snapshots, click
and select Snapshot folder.
Click to select a
display area
Then, double-click
a camera to open it
Right-click the camera ID and select Web
configure to open the Web Configuration tool
To Next Page
Loading...
