EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Guide

Lucent Technologies MERLIN LEGEND Release 6.1
477 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #267 background imageLoading...
Page #267 background image
MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Managing the System
Page 6-32Centralized Telephone Programming
6
Console/Display Instructions Additional Information PC
! Either continue to copy line assignments and programmed features from the
copy extension shown to another extension, or go to Step 7
.
! Return to the Centralized Programming menu.
Select
([LW.
! Save your entry.
Select
(QWHU.
! Return to the Centralized Programming menu.
Select
([LW.
Copying Line/Trunk Button Assignments 6
Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only). You can copy from one extension to another or to a block of
extensions with identical requirements. Use system programming for this
procedure.
If you are copying assignments from an operator position to a block of extensions
that includes both operator and non-operator extensions, the information is copied
only to the operator positions; the non-operator positions are not affected.
Similarly, if you are copying assignments from a non-operator position to a block
of extensions that includes both operator and non-operator extensions, the
information is copied only to the non-operator positions; the operator positions are
not affected. The system does not provide an error tone to signal that the copy did
not work for all of the extensions in the block.
If you are performing this procedure for the first time, see the detailed steps in
“Copy Line/Trunk Assignments” of the “Extensions” section, Chapter 3,
System
Programming
.
Select
(QWHU (
) to continue copying
line assignments from the extension
currently displayed on Line 1 to additional
extensions.
Select
1H[W (
) if the extension
numbers to be copied to are sequential.
Select
(QWHU (
) after completing
programming.
Return to Step 4
to continue
programming. The extension to be copied
from is displayed on Line 1.

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals