EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Guide

Lucent Technologies MERLIN LEGEND Release 6.1
477 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #369 background imageLoading...
Page #369 background image
MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Troubleshooting the System
Page 8-20Calls Not Going to Coverage
8
What to do:
Follow the instructions in your voice mail system documentation to
check that the settings match the system. If the settings are correct or if it is a
Lucent Technologies voice mail system, call the Lucent Technologies Helpline at
1 800 628-2888 (consultation charges may apply).
Calls Not Going to Coverage 8
NOTE:
In Release 6.1 and later systems, network-specific coverage problems can
occur. See the
Network Reference
for details.
Possible Cause 1: An Individual Coverage receiver may not be assigned
.
What to do:
At the extension that is to receive calls, program a Cover button for
the sender’s extension. If a Cover button is programmed, go to Possible Cause 2.
Possible Cause 2: The user’s telephone has Coverage Off or Coverage VMS Off
activated.
What to do:
Check the light next to the programmed Coverage Off button or the
programmed Coverage VMS Off button.
If the light is on, then outside calls do not go to coverage. Press the button
to deactivate the feature and to turn the light off. Check to see whether
calls are now going to coverage. If they are, you have solved the problem.
If the lights are off, go to Possible Cause 3.
Possible Cause 3: The extension may not be assigned to a coverage group.
What to do:
Use system programming to check that the extension is a member of
a coverage group. (See “Group Coverage Member Assignments” in the “Optional
Group Features” section of Chapter 3,
System Programming
.)
If the extension is not assigned, assign it if appropriate. Check to see
whether calls are now going to coverage. If they are, you have solved the
problem. If not, go to Possible Cause 4.
If the extension is assigned, go to Possible Cause 4.
Possible Cause 4: The coverage group may not have a receiver assigned.
What to do: Use system programming to check that a receiver is assigned to the
coverage group (see Chapter 3 in
System Programming
).

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals