MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Managing the System
Page 6-46Changing Calling Restrictions
6
o If Night Service with Outward Restriction is in use on your system, you may
need either to add the HotLine extension to the Night Service Exclusion
List or add the number dialed by a HotLine to a Night Service Emergency
List.
o When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions 6
Changing Calling Restrictions 6
Use this procedure to change individual extensions’ calling restrictions to one of
the following:
■ Unrestricted
■ Restricted from making all outgoing calls
■ Restricted from making toll calls
In Release 3.1 and later systems, checking for calling restrictions is reset after
entered star codes pass those restrictions (in some areas, star codes are
provided by the central office to allow the use of special features available from
the local telephone company). In earlier releases, the star code digits were
processed as dialed digits by ARS, Allowed Lists, Disallowed Lists, and calling
restrictions. Therefore, the actual called party number was not properly processed
when a star code was entered. For more information about star codes, see
“Revising Allowed Lists” on page 6–68
.
Planning Guidelines 6
Changing calling restrictions may affect other features, including Allowed Lists,
Auto Dial, Automatic Route Selection (ARS), Callback, Conference, Coverage,
Disallowed Lists, Display, Extension Status, Forward and Follow Me, Night
Service, personal lines, Pools, Speed Dial, and SA/ICOM buttons. For more
information, see the
Feature Reference
.
NOTES:
1. You can copy restrictions from another extension as described in
“Copy Call Restrictions” in the “Optional Telephone Features” section
of Chapter 3 in
System Programming
.
Console Procedure
([WHQVLRQV→More→More→+RW/LQH→Dial ext.
no.
→(QWHU→([LW→([LW
PC Procedure
→→→→Type ext. no.→
→
→
→
To Next Page
Loading...
Need help?
General
