MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Managing the System
Page 6-68Revising Allowed Lists
6
The Extension Status feature must be set to the calling group or CMS mode
before you assign members to the group. For more information, see “Extension
Status” in the
Feature Reference
and in the “System Features” section of
Chapter 3,
System Programming
.
Changing calling group assignments may affect other features; for more
information, see the
Feature Reference
.
NOTE:
To assign an extension to a new calling group, you must remove it from its
old group before programming the new assignment.
Valid Entries
Extension numbers
Task List: Changing Calling Group Assignments 6
o Obtain Form 7d, Group Calling.
o If necessary, read “Group Calling” in the
Feature Reference
for detailed
information about this feature.
o Plan changes using the planning guidelines above; record the new values
on Form 7d.
o Open the System Programming menu from the MLX-20L telephone used
for system programming or from a PC with SPM.
o Program the change(s), following the instructions for “Group Calling
Member Assignments” in the “Optional Group Features” section of
System
Programming
, Chapter 3, or the summary programming instructions below.
o When you have finished, file Form 7d with the rest of the planning forms.
Programming Instructions 6
Revising Allowed Lists 6
An Allowed List provides some flexibility for extensions with calling restrictions by
allowing specified extensions to dial certain numbers (for example, 911),
regardless of the extension’s calling restrictions. Use this procedure to modify an
Allowed List of telephone numbers that can be dialed.
Console Procedure
([WHQVLRQV→More→*US&DOOLQJ→0HPEHUV→Dial
calling group ext. no.
→(QWHU→Dial ext. no.→ (QWHU→
([LW→([LW→([LW
PC Procedure
→→→→Type calling group ext. no.→
→Type ext. no.→→→→
To Next Page
Loading...
Need help?
General
