MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Managing the System
Page 6-86Changing System Directory Labels
6
Programming Instructions 6
Changing System Directory Labels 6
Use this procedure to change System Speed Dial numbers for all system users.
You can also use this procedure to enter the alphanumeric labels shown on the
System Directory feature of MLX display telephones.
To program on the system programming console:
Use the buttons next to the display and line/feature buttons to specify
alphanumeric characters and punctuation for labels. Use the template provided
with the MLX-20L telephone to see which line buttons correspond to which
alphanumeric characters.
To program with SPM:
Use the PC keyboard for labels. All letters appear on the screen in uppercase.
Planning Guidelines 6
Valid Entries
Speed dial code assignments are 600 through 729.
There can be a total of 130 numbers, with a maximum of 11 characters per label.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes (‘),
stars (*), and pound signs (#).
Task List: Changing System Directory Labels 6
o Obtain Form 10b, System Speed Dial.
o If necessary, read “Labeling” in the
Feature Reference
for detailed
information about this feature.
o Plan changes using the planning guidelines above; record the new values
on Form 10b.
o Open the System Programming menu from the console or a PC with SPM.
Console Procedure More→
/DEHOLQJ→*US&DOOLQJ→Dial calling group ext.
no.→
(QWHU→Drop→Enter label→(QWHU →([LW→([LW
PC Procedure
→
→
→Type calling group ext. no.→
→
7
+
I
→Type label→
→
→
To Next Page
Loading...
Need help?
General
