EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Guide

Lucent Technologies MERLIN LEGEND Release 6.1
477 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #304 background imageLoading...
Page #304 background image
MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide
555-661-118
Issue 1
August 1998
Managing the System
Page 6-69Revising Allowed Lists
6
NOTE:
A Disallowed List takes precedence over an Allowed List.
Planning Guidelines 6
Revising Allowed Lists may affect other features, including Auto Dial, Automatic
Route Selection (ARS), calling restrictions, Conference, Directories, Forward and
Follow Me, Night Service, personal lines, Speed Dial, and Toll Type. For more
information, see the
Feature Reference
.
In Release 3.1 and later systems, star codes may be included in Allowed and
Disallowed Lists. In these releases, dialed star codes are ignored by ARS for
routing calls. Star codes are provided by the central office (CO) to allow the use of
special features (for example, in many areas
 turns off a call-waiting feature
provided by the central office). In Release 3.0 and earlier systems, the star code
digits were processed as dialed digits by ARS, Allowed Lists, Disallowed Lists,
and calling restrictions. Therefore, the actual called party number was not
properly processed when a star code was entered.
Release 3.1 and later systems permit system managers to include star codes in
Allowed and Disallowed Lists. If a star code is allowed, the digits following the star
code are checked normally by Allowed/Disallowed Lists, calling restrictions, and
ARS.
The MERLIN LEGEND Communications System Release 3.1 and later observes
these Bellcore standards for star codes:
Only 2- or 3-digit star codes are recognized. Two-digit star codes must
begin with 1, 4, 5, 6, 7, 8 or 9. Three-digit star codes must begin with a 2 or
a 3.
The star code or codes must come at the beginning of the string of digits
dialed, not at the end or in the middle.
Multiple leading star codes are allowed. For example,
*67*705551212
is
recognized correctly, but in
5551212*67*705553131
the stars are ignored.
Valid Entries
6 digits for each number (an area code plus an exchange, or 6 digits with a
leading 1, where required)
Asterisk (*, Release 3.1 and later systems only) preceding a maximum of one
leading star code per entry
10 numbers for each list (numbered 0 through 9)
8 lists for each system (numbered 0 through 7)
8 lists for each telephone

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals