mmo2008-008-008_a
TOP VIEW
1. 16 mm socket
2. Screwdriver rod
Torque spark plugs as per the follow -
ing illustrations.
NOTE: Ensure spark and washer sits
properly on cylinder head.
mmo2008-008-006_a
NEW SPARK PLUG
1. Torque 1/2 of a turn
mmo2008-008-007_a
USED SPARK PLUG
1. Torque 1/10 of a turn
Using a Torque Wrench.
Torque spark plugs to 27.5 N•m
(20 lbf•ft).
Fuse Removal/Inspe c tion
The electrical system is protected with
fuses, the fuse holders are located in
the engine compartment.
Check fuse condition and replace it if
necessary.
To remove fuse from holder, pull fuse
out. C he ck if filame nt is melted.
1
2
A15E0KA
1. Fuse
2. Check if melted
CAUTION: Do not use a higher rat-
ed fuse as this can cause severe
damage to electrical components
and/or be a potential fire.
WARNING
If fuse has burnt out, source of
malfunction should be determined
and corrected before restarting.
See an authorized LYNX dealer for
servicing.
mmo2008-008-028_a
TYPICAL — RH SIDE OF ENGINE
COMPA RTMENT
1. 5 A main fuse
_____________________
117
To Next Page
Loading...
Need help?
General
