EasyManua.ls Logo

Lynx RaveTM RE 600 E-TEC - 1+1 Seat

Lynx RaveTM RE 600 E-TEC
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For general instructions on mainte-
nance of tracks, refer to the sections
TRACK CONDITION and TRACK TEN-
SION AND A LI GNMENT in the MAIN-
TENANCE section of this guide.
29) 1+1 Seat
Xtrim
®
models only (as option).
WARNING
Anypassengermustbeableto
firmly lay is feet on the footrests
andkeephishandsonthegrab
handles at all times w hen seated.
Respecting those physical criteria
is important to ensures that the
passenger is stable and to reduce
the risks of ejection.
1+1 Seat Removal
Unplug 1+1 seat connector.
mmo2008-003-029_a
1. Connector location
mmo2008-003-028_a
1. Connector
Push and hold sea t latch while gently
lifting r ear of seat.
mmo2008-003-026_a
1. Seat lat ch location
mmo2008-003-025_a
1. Seat latch
Continue lifting movement until you
canreleasethefrontretainingdevice
then completely remove seat.
mmo2008-003-027_a
1. Re taining device
CAUTION: Make sure to unplug
seat harness before removing seat.
1+1 Seat Installation
Insert seat retaining device into set
base.
60
______________________

Table of Contents