EasyManuals Logo

Lynx RaveTM RE 600 E-TEC User Manual

Lynx RaveTM RE 600 E-TEC
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
With the sno wmobile com ple tely
stopped and engine running at idle,
press and release the RE R but ton.
The RER p ilo t lamp w ill blink wh en the
snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Al-
low drive pulley to engage then accel-
erate carefully.
Shifting in Forward
With the sno wmobile com ple tely
stopped and engine running at idle,
press and release the RE R but ton.
RER pilot lamp will stop.
Apply throttle slowly and evenly. Al-
low drive pulley to engage then accel-
erate carefully.
Shutting Off the Engine
Release throttle lever and wait until
engine has returned to idle speed.
Shut off the engine using either en-
gine cut-out switch or tether cord cap
(DESS key) engine cut-out switch.
WARNING
Always remove the tether cord cap
(DESS key) when vehicle is not in
operation in order to prevent acci-
dental engine starting or to avoid
unauthorized use by children or
others or theft.
Post-Operation Care
Shut off the engine. Install rear of ve-
hicle on a wide-base snowmobile me-
chanical sta nd.
Remove snow and ice from rear
suspension, track, front suspension,
steering mechanism and skis.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will p rotect it from frost and snow as
well as help retain its appearance.
70
______________________

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lynx RaveTM RE 600 E-TEC and is the answer not in the manual?

Lynx RaveTM RE 600 E-TEC Specifications

General IconGeneral
BrandLynx
ModelRaveTM RE 600 E-TEC
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals