EasyManua.ls Logo

Lynx RaveTM RE 600 E-TEC - Troubleshooting

Lynx RaveTM RE 600 E-TEC
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Before proceeding with any sus-
pension adjustment, remem ber:
park in a safe place
remove the tether cord cap
(DESS key).
WARNING
Always adjust both front springs to
same position.
FRONT SPRINGS ADJUSTMENT
HANDLING STEERING PROBLEM SOLUTION
Good Comfortable N o adjustment required
Bad
Too easy
to turn
Adjusted
too soft
Increase
spring
preload
Bad Hardtoturn
Adjusted
too hard
Decrease
spring
preload
Preload Adjustment
mmo2008-003-038_a
1. Adjustment ring
2. Ring positions
CAUTION: Make sure that both
front springs are still pre loaded
whenfrontofvehicleisoffthe
ground.
Front Suspension Shock
Damping
Rave 600 HO E-TEC and 800
R Power Tek Only
Compression/Rebound
Adjustment
Front shock on the abo ve men-
tioned models feature a compression/
rebound adjustment.
Turn the damping adjuster accordingly.
Turning it clockwise increases shock
dampin g action (stiffer).
mmo2007-009-020_a
TYPICAL
1. Damping adjuster
_____________________
79

Table of Contents

Related product manuals