Spare drive belt
INSTALLED CORRECTLY
1. E nsure there is no contact with tuned pipe
27) Shields and Guards
WARNING
Never operate engine without belt
guard securely installed or, with
hood, brake disk guard or side pan-
els opened or removed.
Your sn owmobile is provided with a
number of shields and guards. Leave
these in place on your v ehicle as they
are design ed to keep clothing an d
hands out of moving parts and away
from hot components. Never attempt
to make adjustments to any moving
part while the engine is running.
mmo2008-003-015_b
TYPICAL
1. S ide panels
2. Upper front hood
3. Lower front hood
mmo2008-003-062_a
1. Belt guard
2. Brake disk guard
28) Track
WARNING
Never stud a track that has not
been approved for studs. In-
stalling studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or de ath.
Before proceeding with the installa-
tion of spec ial studs on tra cks you
must contact your authorized LYNX
snowmobile dealer for current specific
studding availability and applications.
BRP does not recomm end to ride a
snowmobile equipped with high lug
profile track at high speed in a trail,
on hard packed su rfaces or ice fo r an
extended period of time.
In the event that you have to, reduce
your speed, then minim ize the dis-
tance you ride on those surfaces.
CAUTION: Running those tracks at
high speed in a trail, on hard packed
surfaces or ice put more stress on
the lugs, which tend to heat up as a
result. To avoid potential degrada-
tion or damage to the track, reduce
your speed, then m inimize the dis-
tance you ride on those surface s.
_____________________
59
To Next Page
Loading...
