ENGINE MISFIRES. (cont’d)
2. DESS has read a different code then the one programmed. DESS
pilot lamp blinks rapidly (3 times per second). Engine can not exceed
3000 RPM.
– Install a tether cord cap (DESS key) for which this snowmobile was pro-
grammed.
3. Fouled/defective/worn spark plugs.
– Clean/verify spark plug gap and identification number. Replace a s required.
4. Too much oil supplied to engine.
– Improper oil pump adjustment, refer to an authorized LYNX dealer.
5. Water in fuel.
– Drain fuel system and refill with fresh fuel.
SNOWMOBILE CANNOT REACH FULL SPEED.
1. Drive belt.
– C heck item 6 of ENGINE LACKS ACCELERATION OR POWER.
2. Incorrect track adjustment.
– See MAINTENANCE and/or an authorized LYNX dealer for proper alignment
and tension adjus tments.
3. Pulleys misaligned.
– Contact an authorized LYNX dealer.
4. Engine.
– See items 1, 2, 6 and 7 o f ENGINE LACKS ACCELERATION OR POWER.
_____________________
83
To Next Page
Loading...
