EasyManua.ls Logo

Lynx RaveTM RE 600 E-TEC - Page 88

Lynx RaveTM RE 600 E-TEC
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MODEL RAVE 600
LIQUIDS
Recommended fuel type Regular unleaded
Minimum octane 95 E
Recommended oil (engine)
Refer to RECOMMEN DED
OIL section
Brake system fluid
SRF(DOT4)orGTLMA(DOT4)
Oil type (chaincase/transmission) XP-S synthetic chaincase oil
Mixture
Ethyl glycol/water mix (50%
coolant, 50% distilled water).
Use coolant specifically
designed for aluminum engines
Coolant
Premix (P/N 219 700 362) 12 x 1 L
CAPACITIES
Fuel tank L 39
Oil tank
L3.7
(1)
Measure gap between slider shoe and bottom inside track when exerting a downward
pull to the track.
(2)
CAUTION: Do not attempt to adjust gap on this plug.
(3)
Drive belt height must be adjusted every time a new drive bel t is installed.
Confirm drive belt part number app lication with an auth orized LYN X dealer.
86
______________________

Table of Contents

Related product manuals