MacDon 5000 - Tractor Requirements

AUGER
Drive Type
Overtoad Protection
Auger Type
Auger Speed
CONDITIONER ROLLS
Drive Type
R<>I Type
Ron Diameter
R<>I Length
R<>I Speed
WHEELS
Tread Width
Tires
Tire Pressure
MATERIAL DISCHARGE
Minimum Width
Maximum Width
Rear Fluffing Shield
OPERATING SPEED
Recommended Field Speed
Recommended Transport Speed
TRACTOR REQUIRE:MENTS
Minimum Power
PTO
Hydraulic Cepecity
SPECIFICATIONS
119 in . (3030 mm)
60 hp (45 kw)
Chain final drive
Hydraulic motor
20 in. (50S mm) diameter
variable pitch, center feed
230 RPM
Drivelines from endosed oa bath chain drive
Helical intermeshing steel bars
10 in. (254 mm)
93 in. (2360 mm)
750 RPM
143 In . (3640 mm) 167 In . (4250 mm)
31 x 13.5 - 15 NHS 8 plyTerra-Rib
30 psi (207 kPa)
30 in. (760 mm)
92 in. (2346 mm)
Adjustable
5 mph (8 km/h)
20 mph (30 km / h)
75 hp (56 kw) 90 hp (68 kw)
540 or 1000 RPM - ASAE standard location
1750 psi (12000 kPa). two hydralJic circuits
(SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBUGATION TO
REVISE UNITS PR~OUSLY SOLD .)
10