EasyManua.ls Logo

Malaguti XTM 50 - Coolant; Engine Oil

Malaguti XTM 50
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A
05.03 17
CHAPTER
PAGEISSUE
CHASSIS
ENGLISH
SECTION 2
Getting to know your motorbike
SECTION 2
A - CHASSIS
T
U
F
F.10i
F.11i
T
F.12i
COOLANT
CHECK
1. Remove the cap (T - F.10i) when the engine is cold and exhaust
any residual pressure.
2. The coolant level must be checked on a cold engine since the
level varies with engine temperature. The coolant should be be-
tween the minimum and maximum level marks.
3. If the level is low, add coolant.
4. Refit the cap.
REPLACEMENT
Changing the coolant
1. Park the vehicle on a level surface and put a pan under the
radiator.
2. Remove the clamp (F - F.11i).
3. Detach the pipe (U - F.11i).
If you need too much coolant to reach the recommended level or
if you need to top up too frequently, check the entire cooling
system.
ENGINE OIL
There is an electrical contact inside the tank that turns the red
reserve light of the instrument board on when the tank is running
out of lubricant.
To add oil, remove the cap (T - F.12i) and carefully pour the oil
inside.
Recommended oil: SYNTHETIC 2-STROKE ENGINE OIL
JASO FC or ISO-LEGA

Related product manuals