Manitou AETJ 43 - Page 262

121
ELECTRICITY
80
547379EN
80 (08/03/2017)
CONFIGURATION MENUS
Menu Traction Personalities Travel parameters
Mini
display
Maxi
display
Pitch Value
1.1.1A Armature I Max (A) Armature limit current (A) 50 500 10 (*)
1.1.1F Field I Max (A) Field limit current (A) 10 50 1 50
1.1.2
Traction Accel Delay (s)
Acceleration curve (s)
0.1
5.0
0.1
1.8
1.1.3 Traction Decel Delay (s) Deceleration curve (s) 0.1 5.0 0.1 0.1
1.1.3A Traction Direction Decel Delay (s) Deceleration curve current (A) 0.1 5.0 0.1 0.8
1.1.4
Traction Creep Speed (%)
Zero speed (oset0) (%)
0
25
1
3
1.1.5 Flat Regen Direction Braking (A)
Braking regeneration current on at
(A)
50 500 10 400
1.1.6 Tilt Regen Direction Braking (A) Braking regeneration current in tilt (A) 50 500 10 500
1.1.7 Traction Regen Time (ms) Recup time (mS) 0 300 10 10
1.1.8
Brake Threshold (V)
Threshold voltage (V)
0.09
3.20
0.016
0.8
1.1.9 Traction Maximum Speed (%) Maximum speed (%) 0 100 1 100
1.1.10 Elevated Speed (%) Working speed (%) 0 100 1 13
1.1.11
Tilt Speed (%)
Tilt speed (%)
0
100
1
100
1.1.12 Traction Cut 3 Speed (%) Speed limit 3 (%) 0 100 1 100
1.1.13 Review delay (h) Maintenance intervals (H) 0 100 1 50
1.1.14
Customers Options
Customizable settings
0
31
1
(+)
1.1.15 Low Speed Traction Speed (%) Slow speed (%) 0 100 1 100
1.1.16 Low Battery Start (V) Low battery safe start (V) 14.5 48.0 0.5 18
1.1.17
Low Battery Cutout (V)
Low battery cutout (V)
14.5
48.0
0.5
14.5
1.1.18 High Battery Start (V) High battery safe start (V) 14.5 75.0 0.5 65
1.1.19 High Battery Cutout (V) High battery cutout (V) 14.5 75.0 0.5 70
1.1.20
Battery Protection Level (V)
Battery protection (V)
14.5
48.0
0.5
14.5
1.1.21 Battery Protection Delay (s) Battery protection delay (S) 0.1 2.5 0.1 0.5
1.1.22 Traction Alarm Battery alarm ON
(*) According to motor type.
(+) According to Beep option.
Menu Traction BDI Check Battery Charge Mini display Maxi display Pitch Value
1.4.1 BDI Level (%) BDI battery charge level (%) / / / /
1.4.2
BDI Reset Level (V)
BDI battery nominal voltage (V)
2.00
2.50
0.01
2.10
1.4.3 BDI Discharge Level (V) BDI Re enclenchement (V) 1.50 1.99 0.01 1.70
1.4.4 BDI Warning Level (%) BDI empty battery (V) 0 90 1 30
1.4.5
BDI Cutout Level (%)
BDI Threshold warning (%)
0
90
1
20
Menu 1.5 Traction Fault Log Check Fault Log Mini display Maxi display Pitch Value
Menu Traction BDI Check Battery Charge Mini display Maxi display Pitch Value
1.6.1 CAN Mode Conguration of CAN system Aboma
1.6.2 Chop Select Select voltage of digital output codes On
1.6.3 BDI Battery Charge Indicator On
1.6.4 Fault Log Fault log On
1.6.5
Service Log
Manage fault log
On
1.6.6 EU/US Functionality Select specic functionality Europe/US EU
1.6.7
Traction Full Speed (KPH)
Traction Max. Speed (Km/h)
0
160
1
21
1.6.8 Traction Full Speed (MPH) Traction Max. Speed (mph) 0 100 0 13
1.6.9 Accelerator Characteristic
Select type of accelerator curve
set-point
Centre-Pot
1.6.10 BDI Battery Voltage (V) Battery rated voltage (V) 24 96 2 48