Manitou AETJ 43 - Page 263

ELECTRICITY
122
80
547379EN
80 (08/03/2017)
Menu Traction Motor Setup Motor setup Mini display Maxi display Pitch Value
1.7.1 Armature I Low (A) Armature low current (A) 10 240 10 90
1.7.2 Field I Low (A) Field low current (A) 5 25 1 6
1.7.3
Armature I Mid (A)
Armature mid current (A)
90
400
10
200
1.7.4 Field I Mid (A) Field mid current (A) 6 40 1 25
1.7.5 Armature I High (A) Armature high current (A) 260 500 10 400
1.7.6
Field I High (A)
Field high current (A)
25
50
1
40
1.7.7 Armature Resistance (mOhm) Armature resistance (mOhm) 0 255 1 13
1.7.8 Field Resistance (Ohm) Field resistance (Ohm) 0.25 2.50 0.01 1.26
1.7.9 Drive Proportional Gain Translation proportional gain 0 255 1 2
1.7.10 Drive Integral Gain Travel total gain 0 16 1 6
1.7.11
Brake Proportional Gain
Brake proportional gain
0
255
1
40
1.7.12 Brake Integral Gain Brake total gain 0 16 1 15
1.7.13 Speed Estimate Gain Speed estimated gain 0 2.50 0.01 1.5
Menu Traction BDI Check Battery Charge Mini display Maxi display Pitch Value
1.8.1
Display Default Hours
Select hour meter to display
Aboma
1.8.2 Display Status Type Select type of status data to display On
1.8.3 Display Contrast Set contrast level standard display screen 0 127 1 On
1.8.4 FFD Indicator 1
Select indicator 1 to display for advanced
display screen
On
1.8.5 FFD Indicator 2
Select indicator 2 to display for advanced
display screen
On
1.8.6 Display Fault Messages Validate display of default messages EU
Menu Pump Personalities Properties (hydraulic functions) Mini display Maxi display Pitch Value
2.1.1 Pump I Max Pump max current (A) 50 500 10 350
2.1.2
Ramp Up Delay
Ramp up time (S)
0.1
5.0
0.1
1.8
2.1.3 Ramp Down Delay Ramp down time (S) 0.1 0.5 0.1 0.5
2.1.4 Pump Creep Speed Speed (%) 0 25 1 10