EasyManuals Logo

Manitou MLT 961-145 V PLUS L JD ST4 S1 User Manual

Manitou MLT 961-145 V PLUS L JD ST4 S1
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
3 - 13
CHECK Fuel pre-filter
t
IMPORTANT
t
Wipe the outside of the prefilter as well as its support thoroughly to prevent dust from penetrating the system.
- Open the engine bonnet.
- Check for the presence of water in pre-filter tank 1 and drain if necessary.
- Place a container under drain plug 2 and unscrew it by two or three turns.
- Let the diesel drain free of pollutants and water.
- Tighten the drain plug 2 while the diesel fuel is running out.
LUBRICATE Boom pads*
Operation to be carried out every 10 hours during the first 50 hours of
service, then a last time after 250 hours.
t
IMPORTANT
t
In case of use in abrasive atmospheres (sand, dust, coal), use a protective paint (MANITOU
reference: 483536). For more information, contact your dealer. Completely extend the boom.
- Apply the grease with a brush (e LUBRICANTS AND FUEL) to the 4
sides of the telescopic booms.
- Extend and retract the boom several times to evenly distribute the
grease.
- Remove any excess grease.
* Every 10 hours during the first 50 hours, then a last time after 250 hours.
1
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MLT 961-145 V PLUS L JD ST4 S1 and is the answer not in the manual?

Manitou MLT 961-145 V PLUS L JD ST4 S1 Specifications

General IconGeneral
BrandManitou
ModelMLT 961-145 V PLUS L JD ST4 S1
CategoryFront End Loaders
LanguageEnglish

Related product manuals