Manitou MLT 961-145 V PLUS L JD ST4 S1 User Manual

1 - 28
TELEHANDLER MAINTENANCE INSTRUCTIONS
GENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the telehadler�
- Wear clothes suitable for the maintenance of the telehadler, avoid wearing jewelery and loose clothes� Tie and protect
your hair, if necessary�
- Stop the engine and remove the ignition key, when an intervention is necessary�
- Read the operator's manual carefully�
- Carry out all repairs immediately, even if the repairs concerned are minor�
- Repair all leaks immediately, even if the leak concerned is minor�
- Ensure that process materials and of spare parts are disposed in all safely and in an ecological manner�
- Be careful of the risk of burning and splashing (exhaust, radiator, engine, etc�)�
PLACING THE JIB SAFETY WEDGE
- The telehadler is equipped with a jib safety wedge (e 2 - DESCRIPTION: INSTRUMENTS
AND CONTROLS) that must be installed on the rod of the lifting cylinder when
working beneath the jib�
FITTING THE WEDGE
- Fully raise the jib�
- Place the safety wedge 1 on the rod of the lifting cylinder and secure with the rod
2 and the pin 3�
- Slowly lower the jib then stop the hydraulic movements before it comes into
contact with the wedge�
REMOVING THE WEDGE
- Fully raise the jib�
- Remove the pin and the rod�
- Return the safety wedge to the storage location provided on the telehadler�
t
IMPORTANT
t
Only use the wedge supplied with the telehadler.
MAINTENANCE
- Perform the periodic service (e 3 - MAINTENANCE) to keep your telehadler in good working condition� Failure to perform
the periodic service may cancel the contractual guarantee�
MAINTENANCE LOGBOOK
- The maintenance operations carried out in accordance with the recommendations given in part: 3 - MAINTENANCE and
the other inspection, servicing or repair operations or modifications performed on the telehadler or its attachments shall
be recorded in a maintenance logbook� The entry for each operation shall include details of the date of the works, the
names of the individuals or companies having performed them, the type of operation and its frequency, if applicable�
The part numbers of any telehadler items replaced shall also be indicated�
1
3
3
2
2
649100 EN-US-AU (20/05/2019) MLT 961-145 V PLUS L JD ST4 S1

Manitou MLT 961-145 V PLUS L JD ST4 S1 Specifications

General

Brand	Manitou
Model	MLT 961-145 V PLUS L JD ST4 S1
Category	Front End Loaders
Language	English