Manitou MLT 961-145 V PLUS L JD ST4 S1 - IDENTIFICATION OF THE TELEHANDLER

2 - 10
IDENTIFICATION OF THE TELEHANDLER
As our policy is to promote a constant improvement of our products, our range of telescopic telehandlers may undergo certain
modifications, without obligation for us to advise our customers.
The following needs to be specified every time you order spare parts or request technical information:
NOTE:
For the owner's convenience, it is recommended that a note of these numbers is made in the spaces provided at
the time of the delivery of the telehandler.
For any further technical information regarding your telehandler refer to chapter: 2 – DESCRIPTION: CHARACTERISTICS
TELEHANDLER MANUFACTURER’S PLATE
"Designation"
"Series"
"Year of manufacture"
"Model year"
"Serial Number / Product Identification Number"
"Unladen mass"
"Power"
"Authorized gross vehicle weight"
"Rated capacity"
"Max vertical force (on trailer hook)"
"Drag strain"
TRACTOR APPROVAL PLATE
"Category"
"Homologation N°"
"Product Identification Number"
"Total permissible mass"
"Maximum mass on front axle"
"Maximum mass on rear axle"
"PERMISSIBLE TOWABLE MASS"
• "B-1unbraked"
• "B-2inertia braked"
• "B-3hydraulic braked"
•
"B-4pneumatic braked"
• "T-1drawbar"
• "T-2rigid drawbar"
• "T-3centre axle"
I.C. ENGINE
"MODEL"
"CODE"
"E1" Identification
"SERNO"
"SPEC"
649100 EN-US-AU (20/05/2019) MLT 961-145 V PLUS L JD ST4 S1