Manitowoc Grove GRT655L - Setting the Controller Sensitivity

Grove Published 3-23-2020, Control # 654-04 4-85
GRT655/655L OPERATOR MANUAL OPERATING PROCEDURES
4
Use the Jog Dial or Arrow Buttons on the Navigation Control
Pad to select the desired unit of measure, then press the Jog
Dial or the OK Button.
Setting the Controller Sensitivity
The Controller Sensitivity function screen (Figure 4-54)
allows the operator to adjust the sensitivity of the controllers
and foot pedal (optional).
Icon Description
Swing Function Sensitivity icon - not
selected
Swing Function Sensitivity icon - selected
FIGURE 4-53
9219
FIGURE 4-54
9219
Swing Function Sensitivity icon - active
Telescope Function Sensitivity icon - not
selected
Telescope Function Sensitivity icon -
selected
Telescope Function Sensitivity icon - active
Boom Lift Function Sensitivity icon - not
selected
Boom Lift Function Sensitivity icon - selected
Boom Lift Function Sensitivity icon - active
Main Hoist Function Sensitivity icon - not
selected
Icon Description