Maple Systems Silver Series - Gen Eral Set Tings

The Alarm In di ca tor
This optional feature reflects the status of alarms. The color indicator grows every time a new alarm condition
becomes active. The color indicator is full when ten alarms are active. The Alarm indicator can be used as a rough
indication of how many alarms are active. This can be used to notify the OIT operator when an alarm has occurred
so that he may go to some alarm screen to get more information.
4To activate the Alarm indicator
1. From the Edit menu, select System Parameters. The Set System Parameters dialog box
appears.
2. Click the General tab to display the General form.
3. In the Task Button frame, click Enable in the Attribute box.
4. Click the Indicator tab to display the Indicator form.
5. In the Alarm Indicator frame, click Enable in the Attribute box.
6. Select the color you would like to use.
7. Click OK to exit the System Parameters dialog box.
Gen eral Set tings
In EasyBuilder, you can configure how the task bar looks when it is activated for a more customized look. From the
1010-1001a, Rev 02
Cre ating Win dows 119