Introduction - Welcome
Welcome to the Maple Systems’ Silver Series of Operator Interface Terminals (OITs). Using graphic OITs has never been
easier. This powerful family of graphics operator interface terminals connects to programmable logic controllers (PLCs) to
provide the human-machine interface in industrial applications. The Silver Series has several features not found in other
graphic OITs. This manual explains the operation of the Silver Series OITs and how to implement the many available
features using the EZware-500 Configuration Software.
EZware Sup port
OIT Models Sup ported
For the latest list of Silver Series Models supported by EZware, please visit our website at http://www.maple-systems.com.
PLCs Supported
For the latest list of PLCs and controllers supported by the Silver Series OITs, please visit our website.
About Your Doc u men ta tion
Maple Systems provides many resources to allow you to get the most out of your Silver Series OIT.
· Silver Series Operation Manual (shipped with EZware-500 as a PDF file) - describes installation, general operation
and features of the Silver Series using EZware-500 configuration software.
· Controller Information Sheets - important information specific to each supported protocol.
· EZware-500 On-line Help - covers the operation of EZware. Always available by clicking Help Topics from the
Help menu in EasyBuilder.
For more information about these and other training sources, visit the Maple Systems web site at:
http://www.maple-systems.com
Con ven tions
When using EZware-500, there are usually several ways to perform a task. For example, if you want to copy a graphics
object, you can:
· Click the Copy command on the Edit menu.
· Click the Copy button on the Standard toolbar.
· Press the CTRL + C keys on your com puter.
1010-1001a, Rev 02
Introduction 1
To Next Page
Loading...