Maple Systems Silver Series - Default Chapter; Table of Contents

Ta ble of Con tents
EZware Sup port ...................1
OIT Mod els Sup ported ...........1
PLCs Sup ported ................1
About Your Doc u men ta tion .......1
Con ven tions...................1
What You Need ................2
OIT Ba sics .......................2
What is a Sil ver Se ries OIT? .......4
List of Fea tures.................5
Chap ter 1 - In stal la tion of OITs ............7
Be fore You Be gin ..................7
Un pack ing the Unit .............7
Man ag ing Elec tro static Dis charge ...7
CE Com pli ance ................7
NEMA Rat ing ..................7
En vi ron men tal Con sid er ations .....7
Safety Pre cau tions ..............8
Con trol Panel De sign Guide lines ......8
Con trol Panel Ground ing .........9
Con nect OIT Chas sis Ground to
Con trol Panel..................9
Power Sup ply Se lec tion ..........10
Ca ble Rout ing and Noise Im mu nity . 10
In stal la tion.......................11
Con nect the OIT to Power ........11
Con nect the OIT to the PLC .......12
Panel Prep a ra tion ..............13
Mount the OIT to the Panel .......14
Con fig u ra tion Wir ing ...............14
Con nect the OIT to the PC for
Con fig u ra tion..................15
Fac tory Con fig u ra tion...............15
Chap ter 2 - Cre at ing Your First Pro ject ......17
Be fore You Be gin ..................17
Con nect ing OIT to Com puter .........17
Start ing EZware-500 ...............18
Cre at ing a Sam ple Pro ject ...........19
Set ting the Sys tem Pa ram e ters .....19
Cre at ing a Startup Win dow .......20
Cre at ing a Popup Win dow ........22
Fin ish ing Up......................26
Chap ter 3 - Sim u la tor Mode ..............29
The Sim u la tion Screen ..............29
Trou ble shoot ing Tools Dur ing
Sim u la tion ....................31
Cap tur ing Sim u la tion Screens to Use as
Doc u men ta tion ................31
Wir ing for Nor mal Sim u la tion Mode ....32
Chap ter 4 - Us ing EZware-500 ............35
Over view ........................35
The EasyManager..................35
Com mu ni ca tions Set tings .........36
Op er at ing Modes...............36
The EasyASCIIFontMaker ............37
EasyBuilder’s De fault Text Fonts ....37
Us ing the EasyASCIIFontMaker.....37
The EasyBuilder Ap pli ca tion ..........38
Man ag ing Pro jects ..............39
Print ing Pro jects ................41
Ed it ing and Cre at ing Screen Ob jects 42
Gen eral Set tings ...............58
Se cu rity Set tings Con fig u ra tion.....64
Re start the OIT Au to mat i cally af ter a Pro ject
is Down loaded....................69
Au to mat i cally Save and Com pile the
Pro ject ..........................69
Com pact Flash ....................69
Con nect ing Mul ti ple OITs to one PLC ...70
Hard ware Con nec tion ..............70
Soft ware Con nec tion ...............71
Shar ing Data Be tween the Mas ter OIT
and Slave OIT .................71
Con nect ing Mul ti ple OITs Us ing the
Ethernet Port ..................72
Shar ing Data Be tween the Mas ter OIT,
Slave OIT and PLC ..............75
Us ing the Aux Port ..............76
Chap ter 5 - Cre at ing Win dows ............79
Win dows Fun da men tals .............79
Open ing a Win dow .............79
Cre at ing a New Win dow .........80
Set ting the Win dow Se cu rity Level .....89
As sign ing Un der lay Win dows ......90
How to Dis play Un der lay Win dows..90
Rules That Ap ply to Un der lay
Win dows .....................90
De let ing a Win dow .............92
Us ing Base Win dows ...............92
How to Dis play Base Win dows .....92
Us ing the Com mon Win dow..........101
Op tional set tings ...............103
Chang ing the Ac tive Com mon
Win dow ......................106
Us ing the Fast Se lec tion Win dow ......108
Us ing the Fast Se lec tion Key.......111
Chang ing screens us ing the Fast
Se lec tion win dow ...............111
Chang ing the Fast Se lec tion Win dow 114
Us ing the Task Bar .................117
Us ing the Win dow Bar ...........118
Gen eral Set tings ...............119
Cre at ing a Mes sage Board ...........120
Op tional Pa ram e ters ............121
Chap ter 6 - Cre at ing Graphic Ob jects .......125
Draw ing Ob jects ..................125
Us ing the Draw ing Tools .........125
Us ing Text ....................128
Pre de fined Shapes and Bitmaps .......129
Us ing a Pre de fined Shape ........130