21
5.4.2 NVRAM Nuclei
5.4.3 Front Panel Nuclei
11500 Test succeeded.
11501 Set-up of I2C failed.
11502 The selection of the clock source failed.
11504 The demute of the audio failed.
11600 Test succeeded.
11601 Set-up of I2C failed.
11602 The mute of the audio failed.
11700 Test succeeded.
11701 Set-up of I2C failed.
11702 The mute of the audio failed.
11703 The demute of the audio failed.
11704 The selection of the clock source failed.
11707 Set-up of front panel failed.
11708 Front panel keyboard access failed.
11800 Test succeeded.
11801 Set-up of I2C failed.
11802 The mute of the audio failed.
11803 The demute of the audio failed.
11804 The selection of the clock source failed.
11900 Test succeeded.
11901 Set-up of I2C failed.
11902 The mute of the audio failed.
11903 The demute of the audio failed.
11904 The selection of the clock source failed.
12000 Test succeeded.
12100 Test succeeded.
12200 Test succeeded.
12201 I2C bus busy before start.
12202 NVRAM I2C access time-out.
12203 No NVRAM I2C access acknowledge.
12204 NVRAM I2C access time-out.
12205 NVRAM I2C Write/Read back failed.
12300 Test succeeded.
12301 I2C bus busy before start.
12302 NVRAM I2C read access time-out.
12303 No NVRAM I2C read acknowledge.
12304 NVRAM I2C read failed.
12400 Test succeeded.
12401 Test failed.
12500 Test succeeded.
12501 Test failed.
12600 Test succeeded.
12601 Test failed.
12700 Test succeeded.
12701 Test failed.
12800 Test succeeded.
12801 Test failed.
12900 Test succeeded.
12901 Test failed.
Error code Error description
Error code Error description
40000 Test succeeded.
40001 I2C access failed.
40100 Test succeeded.
40101 I2C access failed.
40102 Invalid input.
40200 Test succeeded.
40201 I2C access failed.
40202 Invalid input.
40400 Test succeeded.
40401 I2C access failed.
40402 Errorlog in NVRAM is corrupt.
40403 Front panel access failed.
40500 Test succeeded.
40501 I2C access failed.
40502 Front panel access failed.
40600 Test succeeded.
40601 I2C access failed.
40700 Test succeeded.
40701 I2C access failed.
40800 Test succeeded.
40801 I2C access failed.
40900 Test succeeded.
40901 I2C access failed.
Error code Error description
50000 Test succeeded.
50001 I2C bus busy.
50002 I2C read access time-out.
50003 No I2C read acknowledges.
50004 I2C read failed.
50005 I2C write access time-out.
50006 No I2C write acknowledges.
50007 I2C write failed.
50008 No echo response from front panel.
50100 Test succeeded.
50101 I2C connection failed.
50200 Test succeeded.
50201 I2C connection failed.
50202 Test failed.
50300 Test succeeded.
50301 I2C connection failed.
50302 Test failed.
50400 Test succeeded.
50401 I2C connection failed.
50402 Test failed.
50500 Test succeeded.
50501 I2C connection failed.
To Next Page
Loading...
