Maxon EPOS4 50/5 - Figure 3-10 Hall Sensor 1 Input Circuit (Analogously Valid for Hall Sensors 2 & 3); Table 3-20 Hall Sensor Specification

Setup
Connections
EPOS4 50/5 Hardware Reference
3-24 CCMC | 2023-07 | rel11726
Table 3-20 Hall sensor specification
Figure 3-10 Hall sensor 1 input circuit (analogously valid for Hall sensors 2 & 3)
Hall sensor
Sensor supply voltage (V
Sensor
)
+5 VDC
Max. Hall sensor supply current 30 mA
Input voltage 0…24 VDC
Max. input voltage +24 VDC
Logic 0 typically <0.8 V
Logic 1 typically >2.0 V
Internal pull-up resistor 2.7 k(referenced to +5.45 V - 0.6 V)