Maxon EPOS4 50/5 - High-speed Digital I;Os

Setup
Connections
EPOS4 50/5 Hardware Reference
3-36 CCMC | 2023-07 | rel11726
3.3.6.3 High-speed Digital I/Os
Alternatively, the sensor interface can be used for high-speed digital I/O operation.
Table 3-32 Differential high-speed digital input specification
Figure 3-23 HsDigIN1 circuit “differential” (analogously valid for HsDigIN2…4)
Continued on next page.
High-speed digital input 1…4 (differential)
Max. input voltage ±12 VDC
Min. differential input voltage ±200 mV
Line receiver (internal) EIA RS422 standard
Max. input frequency 6.25 MHz