Wiring
EPOS4 50/5 Hardware Reference
CCMC | 2022-04 | rel10445
4-61
4 WIRING
In this section you will find the wiring information for the setup you are using. You can either use the consol-
idated wiring diagram (Figure 4-48) featuring the full scope of interconnectivity and pin assignment. Or
you may wish to use the connection overviews for either DC motor or EC (BLDC) motor that will assist you
in determining the wiring for your particular motor type and the appropriate feedback signals.
Figure 4-47 Interfaces – Designations and location
Signs and abbreviations used
The subsequent diagrams feature these signs and abbreviations:
• «EC Motor» stands for brushless EC motor (BLDC).
• Ground safety earth connection (optional).
To Next Page
Loading...