Configuring the BlackArmor Drive 102
Maxtor Black Armor
The Configure window opens:
Step 2: Select your BlackArmor drive from the dropdown menu.
Step 3: Enter the 25-character identification code printed on the drive label.
Step 4: Enter and confirm a drive password.
Note: The password must contain between 6 and 32 characters.
Step 5: Click Set.
A message confirms that a password has been set successfully and offers the
option of setting a password hint:
Step 6: Click Done to close the Password Set window or Set Password Hint to create a
password hint.
Figure 116: Configure
Figure 117: Password Set Successfully
To Next Page