McCrometer ProComm - Keypad and Display

IP Rating
Remote mount
converter
IP67 Die cast aluminum converter (only when connected using cable glands)
Meter mount
converter
IP67 Die cast aluminum converter
Certications and Approvals
• ISO 9001:2015 certied quality management system
• NSF/ANSI/CAN 61 & NSF/ANSI 372
• Certied by MET to UL 61010-1 and MET C22.2 No. 61010-1-04
• CE compliant
COMPONENT
NSF/ANSI/CAN 61
&
NSF/ANSI 372
®
I
A
P
M
O
R
&
T
System Options
• Hastelloy® electrodes
• DC power
• Additional sensor cable up to 475’ (500’ max for model 395 and 200’ max for model 394)
• Extension to hardware clearance
• Annual verication / calibration
• Sensor insertion tool
• Stainless steel ID tag
Temperature Range
Operating and
storage
-20° to 60° C (-4° to 140° F)
Converter Enclosure
IP67 die cast aluminum
Remote mount • Height: 7.3” (18.5 cm)
• Width: 8.5” (21.6 cm)
• Depth: 4.3” (10.9 cm)
Meter mount • Height: 6.9” (17.5 cm)
• Width: 7.2” (18.25 cm)
• Depth: 6.2” (15.7 cm)
Keypad and Display
Can be used to access and change set-up parameters using six membrane keys and an LCD
display
Note regarding cable length: McCrometer recommends minimizing cable length. Electromagnetic ow meters may have
unfavorable signal strength to noise ratio in electrically noisy environments. Longer lengths of cable increase the likelihood
of interference. In those cases where the meter’s signal must be transmitted a long distance, or where the environment
may be particularly noisy, we suggest using the converter’s analog output(s). That allows locating the converter as close as
possible to the metering location.
30124-60 Rev. 1.0 | unreleased
Page 43
SPECIFICATIONS
ProComm
Preliminary