11.0 RETURNING A UNIT FOR REPAIR
If the unit needs to be returned to the factory for repair, please do the following:
• Prior to calling for a return authorization number, determine the model number, serial number (located inside the front
panel of converter), and reason for return.
• Call the McCrometer Customer Service Department at 1-800-220-2279 and ask for a Return Authorization (RA) number.
• Ship the meter in the original packaging, if possible. Do not ship manuals, power cords, or other parts with your unit
unless required for repair.
• Please make sure the meter is clean and free from foreign debris prior to shipping.
• Write the RA number on the outside of the shipping box. All return shipments should be insured.
• Address all shipments to:
McCrometer, Inc.
RMA #
3255 W. Stetson Avenue
Hemet, CA 92545
30124-60 Rev. 1.0 | unreleased
Page 46
RETURNING A UNIT FOR REPAIR
ProComm
To Next Page
Loading...
