McHale Fusion 3 - Page 25

McHale Fusion 3 Baler & Wrapper
25
Beware of high-pressure hoses, even when the
machine is switched off
Also, read and understand manual before working on
any part of the hydraulic system
(CST00111)
Knives of the cutting device should only be removed
with an appropriate tool and protective gloves
(CST00112)
Turn off and remove key from tractor
Read and understand the manual before working on or
performing maintenance on the machine
(CST00113)
Close protective covers before operating the machine
(CST00114)
Hydraulic accumulator is under high pressure
Slowly release hydraulic pressure before carrying out
any maintenance
(CST00115)
Beware of rotating dispensers, ring and moving
wrapping table rollers
(CST000116)
Knife release lever:
horizontal position-locked
vertical position-unlocked
(CST00118)