McHale Fusion 3 Baler & Wrapper
26
Keep hands out of the crush area between the roller
and chassis rail
(CST00120)
Maximum hydraulic pressure and maximum PTO
speed. This machine must not be connected to
hydraulic systems with pressure higher than 210 bar
(CST00121)
Stay clear of rotating PTO shaft. Never use the
machine if the PTO guard is missing or damaged.
Entanglement in the rotating drive line can cause
serious injury or death. It is important to ensure that
the rotating guard on the drive line rotates freely.
Always stop the engine and ensure the driveline has
stopped before making connections, adjustments or
cleaning out PTO driven equipment.
(CST00132)
General warnings
(CST00134)
Disconnect the Fusion 3 feed line and turn off the
control box during road use. Read the operation
instruction manual before proceeding.
(CST00135)
Net amount setting decal
(CST00136)
To Next Page
Loading...
