Medifa 6000 - Removing Padding Plates

14
qq
qq
ww
ww
ww
ww
qq
qq
Service manual for medifa 6000 mobile operating tables, version 2.0
4.4 Removing the padding plates
In order to remove the padding plates of the pool, it is
necessary to remove the four spigots [1].
The padding plate of the lower back, can be removed by
removing the four screws [2].
Depending on the model, mortise and tenon elements
are also screwed to the padding plate of the lower back.
The padding plates are mounted in the reverse order
Components column / top frame
Figure 13