2A-38 - ELECTRICAL 90-830234R3 DECEMBER 1997
Large Rim Stator
a
Front of Engine
b
c
d
d
d
e
d
51
Loctite 222 (92-809818)
51
54132
a - Large Rim Stator
b - Flywheel Cover Stud
c - High/Low Speed Winding Module of Stator
d - Stator Screws [Apply Loctite 222 to threads] [Torque
screws to 60 lb. in. (6.8 N·m)]
e - Stator Harness
1. Install stator as shown.
a
b
c
d
51
Loctite 222 (92-809818)
51
53973
a - Screws; apply Loctite 222 on threads (unless Patch Screw
used) and torque to 60 lbs. in. (6.6 N·m)
b - Stator
c - Stator Harness
d - Trigger Harness
2. Connect stator leads; refer to wiring diagrams in
Section 2D.
3. Install sta-strap.
4. Install starter motor; refer to Section 2B.