GASOLINE ENGINES BRAVO MODELS
Page 72 of 116
454 MAG MPI AND 502 MAG MPI MODELS
1. Place remote control handle(s) in neutral idle position.
IMPORTANT: Be sure that cable is routed to avoid sharp bends and/or contact with
moving parts. DO NOT fasten any items to throttle cable. Outer cable must be free to
move when cable is actuated.
2. Remove flame arrestor.
75113
75142
a
b
c
a-Flame Arrestor
b-Screws
c-Vent Hose
NOTE: If boat is equipped with Quicksilver Zero Effort Controls, the throttle cable mounting
stud must be in the outer hole on the throttle lever.
73855
a
a-Position For Zero Effort Controls
To Next Page
Loading...
