Mercusys AC12G - Security Features

40
Chapter 4
4.7 Security
This function allows you to protect your home network from cyber attacks and
unauthorized users by implementing these network security functions.
4. 7. 1 Firewall
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the trac that is passing through the router based on the protocol. This
function is enabled by default.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Firewall, and congure the parameters as you need.
It’s recommended to keep the default settings.
4. 7. 2 Access Control
Access Control is used to block or allow specic client devices to access your
network (via wired or wireless) based on a list of blocked devices (Blacklist) or a list
of allowed devices (Whitelist).
I want to:
Block or allow specic client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Access Control.
3. Select the access mode to either block (recommended) or allow the device(s) in
the list.
To block specic device(s):
1 ) Select Blacklist and click SAVE.