Mercusys AC12G - Change Password; Local Management

48
Chapter 4
To restore conguration settings:
1. Click BROWSE to locate the backup conguration le stored in your computer,
and click RESTORE.
2. Wait a few minutes for the restoring and rebooting.
To reset the router to factory default settings:
1. Click FACTORY RESTORE to reset the router.
2. Wait a few minutes for the restoring and rebooting.
Note:
• During the resetting process, do not turn o or reset the router.
• We strongly recommend you back up the current conguration settings before resetting the router.
4. 9. 3 Change Password
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Change Password
section.
3. Enter the old password, then a new password twice (both case-sensitive). Click
SAVE.
4. Use the new password for future logins.
4. 9. 4 Local Management
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Local Management
section.