Mercusys AC12G - IP & MAC Binding

42
Chapter 4
• Add unconnected devices
Click Add Manually and enter the Device Name and MAC Address of the device
you want to be allowed.
Done!
Now you can block or allow specic client devices to access your network (via wired
or wireless) using the Blacklist or Whitelist.
4. 7. 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to
bind network device’s IP address to its MAC address. This will prevent ARP Spoong
and other ARP attacks by denying network access to a device with matching IP
address in the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoong and ARP attacks.