Mercusys AC12G - Reboot

64
Chapter 5
2. Select the start time from the drop-down list in the Start elds.
3. Select the end time from the drop-down list in the End elds.
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as rewall. You must specify your time zone once you log in to
the router successfully; otherwise, time-based functions will not take eect.
5.8 Reboot
Some settings of the router will take eect only after rebooting, and the system will
reboot automatically. You can also reboot the router to clear cache and enhance
running performance.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > Reboot, and you can restart your router.
• To reboot the router manually:
Click REBOOT, and wait a few minutes for the router to reboot.
• To set the router to reboot regularly:
1. Tick the Enable box of Reboot Schedule.
2. Specify the Reboot Time when the router reboots and Repeat to decide how
often it reboots.
3. Click SAVE.