61
Chapter 5
5. Click SAVE.
5. 4. 3 HTTP Referer Head Check
HTTP referer header check function can protect your networks against CSRF(Cross-
Site Request Forgery) attacks. This function is enabled by default. You can disable
this function if needed.
5.5 System Log
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > System Log, and you can view the logs of the router.
3. Click SAVE TO LOCAL to save the system logs to a local disk.
5.6 Diagnostics
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to System > Diagnostics.
To Next Page
Loading...
