Mercusys AC12G - Time

53
Chapter 4
• Tracert is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the IP Address or Domain Name of the tested host.
3 ) Modify the Ping Count number and the Ping Packet Size. It’s recommended
to keep the default value.
4 ) If you have chosen Tracert, you can modify the Traceroute Max TTL. It’s
recommended to keep the default value.
4. Click START to begin the diagnostics.
The gure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through Ping.
The gure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through Tracert.
4. 10. 3 Time
This function allows you to set the time manually or to congure automatic time
synchronization. The router can automatically update the time from an NTP server
via the internet.
1. Visit http://mwlogin.net, and log in with the password you set for the router.