-14-
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
M TU Size - The normal M TU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default M TU Size unless required
by your ISP.
Primary/Se condary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal
notation provided by your ISP.
Click Save to save your settings.
3. If your ISP provides a PPPoE connection, select PPPoE, then enter the following
parameters.