-6-
Chapter 3. Quick Installation Guide
This chapter will show you ho w to configure the basic functions of your router using Quick Setup
Wizard within minutes.
1. To access the web management page, open a web browser and enter http://mwlogin.net
in
the address field.
2. A login window will appear. Create a login password when prompted, then click OK.
For subsequent login, use the password you have set.
3. After your successful login, you will see Quick Setup screen to shown as below. Click Next
to continue.
Before configuring the router, you need to set up the TCP/IP Protocol in Obtain an IP addre ss
automatically mode on your PC. For detailed instructions, please refer to
Appendix B:
To Next Page
Loading...
Need help?
General
