-41-
To add a new schedule, the steps below.
1. Click Ad d .
2. In Schedule Description field, create a unique description for the schedule (e.g.
Schedule_1).
3. In Day field, select the day or days you need.
4. In Time field, you can select all day-24 hours or you may enter the Start Time and End Time
in the corresponding field.
5. Click Save to complete the settings.
4.10 Advanced Routing
There are two submenus under the Advanced Routing menu: Static Routing List and Sys t e m
Routing Table. Click any of them, and you will be able to configure the corresponding function.
4.10.1 Static Routing List
Go to Advanced Routing
Static Routing List, and then you can configure the static route. A
static route is a pre-determined path that network information must travel to reach a specific host
or network.
To Next Page
Loading...
Need help?
General
