150Mbps Wireless N Router User Guide
-31-
To modify or delete an existing entry:
1. Click Edit in the entry you want to modify. If you want to delete the entry, click Delete.
2. Modify the information.
3. Click Save.
Click Enable All/Disabled All to make all entries enabled/disabled.
Click Delete All to delete all entries.
Click Ne xt to go to the next page and click Previous to return the previous page.
4.6.2 DMZ
Go to Forwarding
DM Z, you can view and configure DMZ host in the screen. The DMZ host
feature allows one local host to be exposed to the Internet for a special-purpose service such as
Internet gaming or videoconferencing. DMZ host forwards all the ports at the same time. Any PC
whose port is being forwarded must have its DHCP client function disabled and should have a
new static IP Address assigned to it because its IP Address may be changed when using the
DHCP function.
To assign a computer or server to be a DMZ server:
1. Select Enable.
2. Enter the local host IP Address in the DMZ Host IP Address field.
3. Click Save.
4.6.3 UPnP
Go to Forwarding
UPnP, you can view the information about UPnP (Universal Plug and Play)
in the screen. The UPnP feature allows the devices, such as Internet computers, to access the
local host resources or devices as needed. UPnP devices can be automatically discovered by the
UPnP service application on the LAN.
The port number of virtual servers cannot be the same as the remote management port
Security→Remote Management page.
To Next Page
Loading...
Need help?
General
