-23-
• Group Ke y Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a
notice in red as show below.
• Au t hentication Type - You can choose the type for the WEP security on the pull-down list.
The default setting is Auto, which can select
Open System or Shared Key authentication
type automatically based on the wireless station's capability and request.
• WEP Ke y Format - Hexadecimal and ASCII formats are provided. Hexadecimal forma t
stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
ASCII format stands for any combination of keyboard characters in the specified length.
• Se le cted Key - Select which of the four keys will be used and enter the matching WEP key
that you create.
• Ke y Typ
You can select the WEP key length (64-bit, or 128-bit) for encryption. Disabled
means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
4.4.3 Wireless MAC Filtering
Go to Wire less
Wireless MAC Filtering, you can control the wireless access by configuring the
Wireless MAC Address Filtering function.
To Next Page
Loading...
Need help?
General
